Table of Contents
Advertisement
10
SENSe Subsystem
The query enters a 1 or 0 into the output buffer indicating whether
automatic filter length is enabled or disabled.
• 1 is returned when automatic filter length is enabled
• 0 is returned when automatic filter length is disabled
Query Example
AVER:COUN:AUTO?
Error Messages
If [SENSe[1]]|SENSe2:AVERage:COUNt:AUTO is set to ON while
[SENSe[1]]|SENSe2:SPEed is set to 200, the error –221, "Settings
Conflict" occurs. However, automatic averaging is enabled but the
[SENSe[1]]|SENSe2:AVERage:STATe command is not automatically set ON.
368
This command queries whether automatic
filter length selection is on or off for
Channel A.
N1911A/1912A P-Series Power Meters Programming Guide
Hide quick links:
Advertisement
Chapters
Table of Contents
