Trace[1]|2:Unit <Character_Data - Agilent Technologies N1911A Programming Manual

13 TRACe Subsystem
TRACe[1]|2:UNIT <character_data>
This command sets the units for the trace for the specified channel
This command is included for compatibility purposes only. It has the same purpose as
N O T E
[SENSe[1]]|SENSe2:TRACe:UNIT <character_data>, which should be the
preferred command.
Syntax
Parameters
Example
640
TRAC
1
2
Item
character_data
TRAC2:UNIT W
Space
:UNIT
?
Description/Default
• DBM: dBm
• W: Watts
This command sets the trace units for
Channel B Watts.
N1911A/1912A P-Series Power Meters Programming Guide
character_data
Range of Values
DBM
W