Agilent Technologies N1911A Programming Manual page 187

Example
MEAS:RAT:REL?
N1911A/1912A P-Series Power Meters Programming Guide
Item Description/Default
source list This channel list specifies the channels used to
calculate the ratio.
If unspecified and the current window setup is a
ratio measurement then this ratio setup is used,
otherwise it defaults to Channel A/B (N1912A)
or A/A (N1911A).
1
The mnemonic DEF means DEFault. This is not equivalent to the DEFault parameter used in the
command sub-systems. The parameters must be entered in the specified order. If parameters are
omitted, they default from the right. The parameter DEFault is used as a place holder. Specifying
DEF leaves the parameter value unchanged.
2
When the measurement result is linear this parameter represents the number of significant
digits. When the measurement result is logarithmic 1 to 4 represents of 1, 0.1, 0.01 and 0.001
respectively.
3
N1912A only.
MEASurement Commands
This command queries the relative ratio
measurement on the upper window/upper
measurement.
2
Range of Values
3
(@1),(@2)
3
(@2),(@1)
(@1),(@1)
3
(@2),(@2)
159