Trace[1]|2:Measurement:transition[1]|...|10:Positive:occurrence - Agilent Technologies N1911A Programming Manual

13 TRACe Subsystem
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:OCCu
rrence?
This command returns the position, relative to the trigger instant, of the
n
Syntax
TRAC
Reset Condition
On reset, this parameter is not affected.
Example
Error Messages
• If a P- Series sensor is not connected, error –241, "Hardware missing"
• If a P- Series sensor is connected and Free Run trigger acquisition is
634
th
occurrence of a positive transition found on a trace.
:MEAS
1
2
TRAC2:MEAS:TRAN:POS:OCC?
occurs.
selected, error –221, "Settings conflict" occurs.
:TRAN
1
2|...|10
This command returns the position,
relative to the trigger instant, of the 1st
occurrence of a positive transition
found on trace 2.
N1911A/1912A P-Series Power Meters Programming Guide
:POS :OCC
?