Calibration[1]|2:Rcfactor <Numeric_Value - Agilent Technologies N1911A Programming Manual

CALibration[1]|2:RCFactor <numeric_value>
This command is used with 8480 Series power sensors or N8480 Series
power sensors with Option CFT to set the reference calibration factor of
the specified channel. Reference calibration factors can also be set using
sensor calibration tables. The power meter uses the most recently set
reference calibration factor.
Syntax
Parameters
N1911A/1912A P-Series Power Meters Programming Guide
CAL
1
2
Item Description/Default
numeric_value A numeric value:
•
•
•
Space
:RCF
?
DEF: the default is 100 %
MIN: 1 %
MAX:150 %
CALibration Subsystem
numeric_value
DEF
MIN
MAX
Space
MIN
MAX
Range of Values
1.0 to 150.0 PCT
DEF
MIN
MAX
4
211