Trigger[:Sequence]:Level <Numeric_Value - Agilent Technologies N1911A Programming Manual

TRIGger[:SEQuence]:LEVel <numeric_value>
This command sets the power level at which a trigger event is recognized.
Syntax
Parameters
N1911A/1912A P-Series Power Meters Programming Guide
TRIG :SEQ
Item Description/Default
numeric_value The power level at which a trigger event is
recognized.
•
Units are resolved to 0.1 dBm.
1
If a channel offset has been previously set, a higher numeric value is permitted.
Offsets" on page 38 for more information.
:LEV
Space
DEF: the default value is 0 dBm
TRIGger Subsystem
numeric_value
DEF
?
Range of Values
–40 to 20 dBm
DEF
See"Setting
14
1
671