[Sense[1]]|Sense2:Average[:State] <Boolean - Agilent Technologies N1911A Programming Manual

[SENSe[1]]|SENSe2:AVERage[:STATe] <boolean>
This command is used to enable and disable averaging.
Syntax
Example
AVER 1
Reset Condition
On reset, averaging is OFF.
Query
[SENSe[1]]|SENSe2:AVERage[:STATe]?
The query enters a 1 or 0 into the output buffer indicating the status of
averaging.
• 1 is returned when averaging is enabled
• 0 is returned when averaging is disabled
N1911A/1912A P-Series Power Meters Programming Guide
:
SENS
1
SENS2
:STAT
AVER
This command enables averaging on
Channel A.
SENSe Subsystem
Space
0|OFF
1|ON
?
10
371