Agilent Technologies N1911A Programming Manual page 696

14 TRIGger Subsystem
Example
TRIG:SEQ1:HOLD 0.1
Reset Condition
On reset the trigger holdoff is set to 1 µs.
Query
TRIGger[:SEQuence]:HOLDoff?
The query returns the current trigger holdoff setting.
Query Example
TRIG:SEQ:HOLD?
668
This command sets the trigger holdoff to
100 ms for Channel A.
This command queries the trigger holdoff
setting for Channel A.
N1911A/1912A P-Series Power Meters Programming Guide