Service:sensor[1]|2:Snumber - Agilent Technologies N1911A Programming Manual

SERVice:SENSor[1]|2:SNUMber?

This query returns the serial number for P- Series, E- Series sensors and
N8480 Series sensors. Serial number information is stored in the sensor's
EEPROM.
Syntax
Example
SERV:SENS2:SNUM?
Error Messages
• If no sensor is connected, error –241, "Hardware missing" occurs.
• If a a sensor other than a P- Series, N8480 Series or E- Series power
N1911A/1912A P-Series Power Meters Programming Guide
SERV :SENS
sensor is connected, error –241 "Hardware missing" occurs.
:SNUM
1
2
This query returns the serial number of
the P- Series, E- Series sensor or N8480
Series sensor connected to Channel B.
SERVice Subsystem
?
15
725