Agilent Technologies N1911A Programming Manual page 424

P-series power meters

Hide thumbs Also See for N1911A:

Table of Contents

SENSe Subsystem

[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe?

The query returns a 1 or 0 into the output buffer indicating whether a

table is enabled or disabled.

• 1 is returned when the table is enabled

• 0 is returned when the table is disabled

Query Example

SENS2:CORR:CSET1:STAT?

Error Messages

• If you attempt to set this command to ON and no table has been

• If the CSET1 command is used when a P- Series, N8480 Series

selected using

[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:[SELect] then error

–221, "Settings conflict" occurs and

[SENSe[1]]|SENSe2:CORRection:CSET[1]|CSET2:STATe remains OFF.

(excluding Option CFT) or an E- Series power sensor is connected, the

error –241 "Hardware missing" occurs.

This command queries whether there is

currently an active sensor calibration

table for Channel B.

N1911A/1912A P-Series Power Meters Programming Guide

Show Quick Links

Chapters

Table of Contents

1912a N1912a