Agilent Technologies N1911A Programming Manual page 653

TRACe Subsystem 13
Error Messages
• If a P- Series sensor is not connected, error –241, "Hardware missing"
occurs.
• If a P- Series sensor is connected and Free Run trigger acquisition is
selected, error –221, "Settings conflict" occurs.
TIf you attempt to measure a pulse out of the range of the capture, for example, measure
N O T E
the 5th pulse and there are only 4 pulses displayed, the power meter returns #0##9.91E37
as the result.
N1911A/1912A P-Series Power Meters Programming Guide 625