Unit[1]|2|3|4:Power:ratio <Ratio_Unit - Agilent Technologies N1911A Programming Manual

UNIT[1]|2|3|4:POWer:RATio <ratio_unit>
This command sets the window/measurement ratio units.
• UNIT1:POWer:RATio sets the ratio measurement units for the upper
• UNIT2:POWer:RATio sets the ratio measurement units for the lower
• UNIT3:POWer:RATio sets the ratio measurement units for the upper
• UNIT4:POWer:RATio sets the ratio measurement units for the lower
Syntax
Parameters
N1911A/1912A P-Series Power Meters Programming Guide
window/upper measurement.
window/upper measurement.
window/lower measurement.
window/lower measurement.
UNIT 1
2
3
4
Item Description/Default
ratio_unit The ratio measurement unit.
•
:POW
:RAT
The default unit is DB
UNIT Subsystem
Space ratio_unit
?
Range of Values
DB
PCT
16
735