13
TRACe Subsystem
TRACe[1]|2:STATe <boolean>
This command enables or disables trace capture for the specified channel.
This command does not allow the setting set to ON when either measurement channel (for
N O T E
dual channel) is configured to initiate trigger buffering.
Syntax
Example
Reset Condition
On reset trace capture is set to OFF.
Query
TRACe[1]|2:STATe?
The query command enters a 1 or 0 into the output buffer indicating
whether or not trace capture is enabled or disabled.
638
TRAC
1
2
TRAC2:STAT 1
Space
:STAT
?
This command enables trace capture for
Channel B.
N1911A/1912A P-Series Power Meters Programming Guide
0|OFF
1|ON