Calculate[1]|2|3|4:Gain Commands - Agilent Technologies N1911A Programming Manual

P-series power meters

Hide thumbs Also See for N1911A:

Table of Contents

CALCulate Subsystem

CALCulate[1]|2|3|4:GAIN Commands

These commands are used to enter and enable a display offset on the

specified window/measurement. The display offset is applied to the

measurement signal after any math calculation.

The following commands are detailed in this section:

CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric value>

CALCulate[1]|2|3|4:GAIN:STATe <boolean>

N1911A/1912A P-Series Power Meters Programming Guide

Show Quick Links

Table of Contents

1912a N1912a