Agilent Technologies N1911A Programming Manual page 457

• 1 is returned when the upper range is selected
• 0 is returned when the lower range is selected
Query Example
POW:AC:RANG?
Error Messages
This command is used with the E- Series power sensor. If one is not
connected the error –241, "Hardware missing" occurs.
For E-Series power sensor (E9320), the auto ranging feature will be disabled when normal
N O T E
and trigger modes are selected.
N1911A/1912A P-Series Power Meters Programming Guide
This command queries the current setting
of the power sensor range.
SENSe Subsystem 10
429