Table 5-16 Measurement Units; Display[:Window[1]|2]:Analog:upper <Numeric_Value - Agilent Technologies N1911A Programming Manual

5 DISPlay Subsystem
DISPlay[:WINDow[1]|2]:ANALog:UPPer <numeric_value>
This command sets the analog meter upper scale limit.
This command has the same purpose as DISPlay[:WINDow[1]|2]:METer:UPPer
N O T E
<numeric_value>.
The units used are dependent on the current setting of UNIT:POWer and
CALCulate:RELative:STATe as shown in

Table 5-16 Measurement Units

Measurement Mode
Single Channel
Ratio
Difference
228
Measurement Type
Avg, Pk
Pk–Avg
Avg, Pk, Pk–Avg
Avg, Pk
Pk–Avg
Table 5-
CALC:REL:STAT OFF
Linear Log
Watt dBm
% dB
% dB
Watt dBm
% dB
N1911A/1912A P-Series Power Meters Programming Guide
16.
CALC:REL:STAT ON
Linear Log
% dB
% dB
% dB
% dB
% dB