Sense[1]|2:Trace:x:scale:pdiv <Numeric_Value - Agilent Technologies N1911A Programming Manual

SENSe[1]|2:TRACe:X:SCALe:PDIV <numeric_value>
This command is used to set the X Scale value (per division) for the
selected trace.
This command is only applicable when N192x or E932x sensor is present and trigger
N O T E
acquisition mode is selected.
Syntax
SENS
1
2
Parameters
Example
SENS:TRAC:X:SCAL:PDIV 0.02 This command sets the X Scale value of
SENS2:TRAC:X:SCAL:PDIV
0.05
N1911A/1912A P-Series Power Meters Programming Guide
:TRAC
:X
Item Description/Default
numeric_value The numeric value for X-axis scale.
:PDIV
:SCAL
Channel A to 0.02 step.
This command sets the X Scale value of
Channel B to 0.05 step.
SENSe Subsystem
numeric_value
Space
?
Range of Values
2 ns to 0.1 s
10
461