Agilent Technologies N1911A Programming Manual page 219

Query
CALCulate[1]|2|3|4:MATH[:EXPRession]?
The query returns the current math measurement setting on the specified
window.
Query Example
CALC1:MATH?
Error Messages
• For the single channel N1911A power meter: if <string> is not set to
• For the dual channel N1912A power meter: if <string> is not set to
N1911A/1912A P-Series Power Meters Programming Guide
"(SENS1)" while SENSe:SPEed is set to 200, error –221, "Settings
Conflict" occurs.
"(SENS1)" or "(SENS2)" while SENS1:SPEEd or SENS2:SPEEd is set to
200, error –221, "Settings Conflict" occurs.
This command queries the current setting
of the math expression on the upper
window/upper measurement.
CALCulate Subsystem 3
191