[Sense[1]]|Sense2:Correction:gain2:State <Boolean - Agilent Technologies N1911A Programming Manual

[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe <boolean>
This command is used to enable/disable a channel offset for the power
meter setup. The [SENSe[1]]|SENSe2:CORRection:GAIN2[:INPut]
[:MAGNitude] command is used to enter the loss/gain value.
Syntax
SENS
SENS2
Example
CORR:GAIN2:STAT ON
Reset Condition
On reset, channel offsets are disabled.
N1911A/1912A P-Series Power Meters Programming Guide
:
1 CORR
:GAIN2 :STAT
This command enables a channel offset on
Channel A.
SENSe Subsystem
Space
0|OFF
1|ON
?
10
405