Agilent Technologies N1911A Programming Manual page 270

5 DISPlay Subsystem
Example
DISP:WIND2:RES 4
Reset Condition
On reset, the resolution is set to 3.
Query
DISPlay[:WINDow[1]|2]:RESolution? [MIN|MAX]
The query returns the current setting of the window's resolution or the
value associated with MIN and MAX. The format of the response is <NR1>.
Query Example
DISP:WINDow1:NUMber2RES?
242
This command sets the lower window's
resolution to four significant digits if the
measurement result is linear, or to 0.001
if the measurement result is logarithmic.
This command queries the resolution
setting of the upper window/lower
measurement.
N1911A/1912A P-Series Power Meters Programming Guide