Calculate[1]|2|3|4:Relative:state <Boolean - Agilent Technologies N1911A Programming Manual

CALCulate[1]|2|3|4:RELative:STATe <boolean>
This command enables/disables relative mode. If the command is:
• disabled, the measurement signal remains unchanged.
• enabled, the current relative value set by
Syntax
Example
CALC1:REL:STAT OFF
Reset Condition
On reset, relative mode is disabled.
Query
CALCulate[1]|2|3|4:RELative:STATe?
N1911A/1912A P-Series Power Meters Programming Guide
CALCulate:RELative:MAGnitude:AUTO is applied to the measurement
signal.
CALC 1
2
3
4
:STAT
:REL
This command disables the relative mode
on the upper window/upper
measurement.
CALCulate Subsystem
Space
0|OFF
1|ON
?
3
197