Agilent Technologies N1911A Programming Manual page 706

14 TRIGger Subsystem
Parameters
Example
TRIG:SEQ1:COUN 10
Reset Condition
On reset, the value is set to 1.
Query
TRIGger[1]|2[:SEQuence[1]|2]:COUNt?
The query returns the current setting of trigger events for a specified
channel.
678
Item Description/Default
numeric_value The number of triggered events for the
measurement cycle.
• DEF: the default value is 1
This command sets the number of
triggered events to 10 for the Channel A
measurement cycle.
N1911A/1912A P-Series Power Meters Programming Guide
Range of Values
1 to 50
DEF