Agilent Technologies N1911A Programming Manual page 704

14 TRIGger Subsystem
Example
TRIG:SEQ:SLOP NEG
Reset Condition
On reset the value is set to POSitive.
Query
TRIGger[:SEQuence]:SLOPe?
The query returns the current value of <character_data>.
Query Example
TRIG:SEQ:SLOP?
Error Messages
• If 8480, N8480, E4410, E9300 or E9320 sensor is connected and trigger
676
source is not set to external, –221 "Settings conflict" occurs.
This command sets the trigger event to be
recognized on the falling edge of the
triggering signal.
This command queries the current value
of <character_data> for Channel A.
N1911A/1912A P-Series Power Meters Programming Guide