[Sense[1]]|Sense2:Sweep[1]|2|3|4:Offset:time <Numeric_Value - Agilent Technologies N1911A Programming Manual

10 SENSe Subsystem
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME
<numeric_value>
This command sets the delay between the delayed trigger point and the
start of the time- gated period (the offset time) for a P- Series sensor or a
E9320 sensors set to NORMal mode. To set an E9320 sensor to NORMal
mode, refer to the command
<character_data>"
Syntax
SENS
SENS2
Parameters
438
on page 410.
:
SWE
1
Item Description/Default
numeric_value The delay between the trigger point and the
start of the time-gated period.
•
Units are resolved to 1 ns.
"[SENSe[1]]|SENSe2:DETector:FUNCtion
:OFFS
1
2
3
4
DEF: the default value is 0 seconds
N1911A/1912A P-Series Power Meters Programming Guide
Space
:TIME numeric_value
Range of Values
–1 to 1 second
DEF
DEF
?