SYSTem:COMMunicate:LAN:CURRent:ADDRess?
This command returns the current setting of the IP address in use by the
power meter.
If DHCP or AutoIP are enabled and successful, then one of these IP address modes assigns
N O T E
the IP address, otherwise it is the static IP address.
Syntax
Example
SYST:COMM:LAN:CURR:ADDR?
N1911A/1912A P-Series Power Meters Programming Guide
:COMM
SYST
:LAN
:CURR
This command queries the current setting
of the IP address.
SYSTem Subsystem
:ADDR
?
12
497