Agilent Technologies N1911A Programming Manual page 405

Query Example
SENS2:AVER2?
Error Messages
• If the command is used when a sensor other than a P- Series or E9320
•
N1911A/1912A P-Series Power Meters Programming Guide
power sensor is connected, error –241, "Hardware missing" occurs
If the command is used when an E9320 sensor is connected and set to
AVERage mode rather than NORMal mode, the error –221, "Settings
Conflict" occurs.
This command queries whether averaging
is on or off for Channel B.
SENSe Subsystem 10
377