Signal Descriptions
A.10
ITM interface
Name
Direction
ATVALID
Output
AFREADY
Output
ATDATA[7:0]
Output
ATIDITM[6:0]
Output
ATREADY
Input
TPIUACTV
Input
TPIUBAUD
Input
A-12
Table A-10 lists the signals of the ITM interface.
Description
ATB valid.
ATB flush.
ATB data.
ITM ID for TPIU.
ATB ready.
TPIU active indication signal.
Reference for the timestamp counter, so that timestamps are at the observable baud rate
of the external protocol.
Copyright © 2005-2008 ARM Limited. All rights reserved.
Non-Confidential
Table A-10 ITM interface
ARM DDI 0337G
Unrestricted Access