AHB Trace Macrocell Interface
16.1
About the AHB trace macrocell interface
16-2
The AHB Trace Macrocell (HTM) interface enables a simple connection of the AHB
trace macrocell to the processor. It provides a channel for the data trace to the HTM.
To use the HTM interface, the trace level must be set to level 3 before implementation.
TRCENA must also be set to 1 before you enable the HTM to enable the HTM port to
supply trace data.
Copyright © 2005-2008 ARM Limited. All rights reserved.
Non-Confidential
ARM DDI 0337G
Unrestricted Access