Table 8-6 Systick Current Value Register Bit Assignments; Table 8-7 Systick Calibration Value Register Bit Assignments; Figure 8-6 Systick Calibration Value Register Bit Assignments - ARM Cortex-M3 Technical Reference Manual

Nested Vectored Interrupt Controller
Bits Field
[31:24] -
[23:0] CURRENT
31
Bits Field Function
[31] NOREF 1 = the reference clock is not provided.
8-12
Table 8-6 describes the bit assignments of the SysTick Current Value Register.
Function
Reserved
Current value at the time the register is accessed. No read-modify-write protection is provided,
so change with care.
This register is write-clear. Writing to it with any value clears the register to 0. Clearing this
register also clears the COUNTFLAG bit of the SysTick Control and Status Register.
SysTick Calibration Value Register
Use the SysTick Calibration Value Register to enable software to scale to any required
speed using divide and multiply.
The register address, access type, and Reset state are:
Address
0xE000E01C
Access Read
Reset state STCALIB
Figure 8-6 describes the bit assignments of the SysTick Calibration Value Register.
30 29 24 23
Reserved
SKEW
NOREF

Figure 8-6 SysTick Calibration Value Register bit assignments

Table 8-7 describes the bit assignments of the SysTick Calibration Value Register.
Copyright © 2005-2008 ARM Limited. All rights reserved.

Table 8-6 SysTick Current Value Register bit assignments

Table 8-7 SysTick Calibration Value Register bit assignments

Non-Confidential
TENMS
0
ARM DDI 0337G
Unrestricted Access