Table 11-18 Settings For Dwt Function Registers - ARM Cortex-M3 Technical Reference Manual

System Debug
11-28
Table 11-18 describes the function settings of the DWT Function Registers.
Value Function
b0000 Disabled
b0001 EMITRANGE = 0, sample and emit PC through ITM
EMITRANGE = 1, emit address offset through ITM
b0010 EMITRANGE = 0, emit data through ITM on read and write.
EMITRANGE = 1, emit data and address offset through ITM on read or write.
b0011 EMITRANGE = 0, sample PC and data value through ITM on read or write.
EMITRANGE = 1, emit address offset and data value through ITM on read or write.
b0100 Watchpoint on PC match.
b0101 Watchpoint on read.
b0110 Watchpoint on write.
b0111 Watchpoint on read or write.
b1000 ETM trigger on PC match
b1001 ETM trigger on read
b1010 ETM trigger on write
b1011 ETM trigger on read or write
b1100 EMITRANGE = 0, sample data for read transfers
EMITRANGE = 1, sample Daddr [15:0] for read transfers
b1101 EMITRANGE = 0, sample data for write transfers
EMITRANGE = 1, sample Daddr [15:0] for write transfers
b1110 EMITRANGE = 0, sample PC + data for read transfers
EMITRANGE = 1, sample Daddr [15:0] + data for read transfers
b1111 EMITRANGE = 0, sample PC + data for write transfers
EMITRANGE = 1, sample Daddr [15:0] + data for write transfers
Note
• If the ETM is not fitted, then ETM trigger is not possible.
Copyright © 2005-2008 ARM Limited. All rights reserved.

Table 11-18 Settings for DWT Function Registers

Non-Confidential
ARM DDI 0337G
Unrestricted Access