Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 1486

revision table See
Revit Architecture An Autodesk product. Revit Architecture is a building design and documentation system
that uses building information modeling to coordinate changes across all aspects of an architecture project.
Revit MEP An Autodesk product. Revit MEP optimizes mechanical/electrical/plumbing (MEP) systems
engineering through data-driven system sizing and design. It provides a building information modelling
design and documentation solution for MEP engineering.
Revit Structure An Autodesk product. Revit Structure integrates a physical model for layout, coordination,
and documentation with an independently editable analytical model for building design and analysis. Using
a single building information model and dynamic linking to third-party analysis applications, Revit Structure
integrates and coordinates structural design and documentation.
revolve Solid geometry that turns (revolves) around an axis. For example, you can use the Revolve tool to
design a dome roof, a column, or door knobs.
See Creating Solid Revolves
RFA The file format for a Revit family. (See
See Family Editor Basics
riser The vertical face of a step in a set of stairs.
room A defined space in a building, used for a specific purpose and separated from other areas by walls,
partitions, or
For more information, see
room separation line A line that you draw in a view to define areas that are used for different purposes,
when a wall between the rooms is not desired. Room separation lines are visible in plan views, 3D views,
and perspective views.
For example, the following floor plan uses room separation lines to distinguish the entry from the kitchen
and dining areas. For more information, see
1448 | Glossary
revision schedule.
on page 380 and
on page 341.
room separation lines.
Rooms on page 913.
Void Revolves on page 392.
family on page 1397.)
Room Separation Lines on page 918.