Display Connection - 3Com 5500-EI PWR Reference Manual

display connection

Syntax
display connection [ access-type { dot1x | mac-authentication } | domain isp-name | interface
interface-type
radius-scheme-name | hwtacacs-scheme hwtacacs-scheme-name | vlan vlan-id | ucibindex
ucib-index | user-name user-name ]
View
Any view
Parameters
access-type { dot1x | mac-authentication }: Displays user connections of a specified access type.
Here, dot1x is used to display all 802.1x user connections, and mac-authentication is used to display
all MAC authentication user connections.
domain isp-name: Displays all user connections under specified ISP domain. Here, isp-name is the
name of an ISP domain, a string of up to 128 characters. You can only specify an existing ISP domain.
interface interface-type interface-number: Displays all user connections on a specified port.
ip ip-address: Displays all user connections with a specified IP address.
mac mac-address: Displays the user connection with a specified MAC address. Here, mac-address is
in hexadecimal format (in the form of H-H-H).
radius-scheme radius-scheme-name: Displays all user connections using a specified RADIUS
scheme. Here, radius-scheme-name is a string of up to 32 characters.
hwtacacs-scheme hwtacacs-scheme-name: Displays all user connections using a specified RADIUS
scheme. Here, hwtacacs-scheme-name is a string of up to 32 characters.
vlan vlan-id: Displays all user connections of a specified VLAN. Here, vlan-id ranges from 1 to 4094.
ucibindex ucib-index: Displays the user connection with a specified connection index. Here, ucib-index
ranges from 0 to 2071.
user-name user-name: Displays the connection of a specified user. Here, user-name is a character
string in the format of pure-username@domain-name. The pure-username cannot be longer than 55
characters, the domain-name cannot be longer than 24 characters, and the entire user-name cannot be
longer than 184 characters.
Description
Use the display connection command to display information about specified or all user connections.
If you execute this command without specifying any parameter, all user connections will be displayed.
This command cannot display information about the connections of FTP users.
Related commands: cut connection.
Examples
# Display information about all user connections.
|
interface-number
|
ip ip-address mac
1-10
|
mac-address radius-scheme