Clear Mac Address-Table - Cisco 220 Series Smart Plus Reference Manual

Address Table Commands

clear mac address-table

clear mac address-table
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
switchxxxxxx(config)# bridge multicast reserved-address 00:3f:bd:45:5a:b1
discard
To clear the learned entries from the forwarding database (FDB), use the clear mac
address-table Privileged EXEC command.
Syntax
clear mac address-table dynamic [interfaces
Parameters
interface-id
• interfaces
on specific interfaces. The interface can be one of these types: Ethernet
port, or port channel.
vlan-id
• vlan —(Optional) Deletes all secure addresses learned on a VLAN.
Default Configuration
If no interface or VLAN is specified, all entries in the dynamic MAC address table
will be cleared.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# clear mac address-table dynamic interfaces gi11
interface-id
—(Optional) Deletes all dynamic (learned) addresses
5
| vlan vlan-id ]
89