Cable Routing; Wipe Data In Disk Using Secure Erase - Cisco NCS 1001 Hardware Installation Manual

Cable Routing

Cable Routing

Figure 49: Cable Routing
Routing of ground cable: If there is a requirement to route ground cable separately from other electrical cables,
it can be passed under the cable managed bracket and tied with bracket arm.
Routing of other cables: If there is a requirement of separate routing of fibre and copper cables, there are
several 1 RU fibre management trays available which can be made use of during installation.

Wipe Data in Disk Using Secure Erase

When NCS 1001 becomes faulty, contact TAC to open a Return Material Authorization (RMA) request.
Before opening a RMA request, the user can securely wipe data in NCS 1001 disks using the Secure Erase
feature. The Secure Erase feature is supported from BIOS version v13.10.
Warning
Hardware Installation Guide for Cisco NCS 1001
52
Use this procedure only during RMA.
Replace Cisco NCS 1001 Components