Mounting the Cisco NCS 2002 Brackets
This chapter explains how to install the NCS 2002 brackets
The sections are:
•
•
NTP-L44 Mounting the Brackets in ANSI Configuration
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Perform these procedures as required:
•
NTP-L44 Mounting the Brackets in ANSI Configuration, page 45
NTP-L45 Mounting the Brackets in ETSI Configuration, page 51
DLP-L35 Mounting the 19-inch Brackets on the NCS 2002 Shelf for ANSI Rack Configuration, on
page 46
5
C H A P T E R
This task installs the 19-inch mounting brackets to
the NCS 2002 shelf for ANSI rack configuration.
• #2 Phillips Dynamometric screwdriver
• Medium slot-head screwdriver
• Small slot-head screwdriver
NTP-L41 Unpacking and Inspecting the Shelf, on
page 20
As needed
Onsite
None
Cisco NCS 2000 Series Hardware Installation Guide
45