Ntp-B163 Restore The Node To Factory Configuration; Figure 14-9 Restoring The Database-In-Process Notification - Cisco ONS 15327 Procedure Manual

NTP-B163 Restore the Node to Factory Configuration

Figure 14-9 Restoring the Database—In-Process Notification
Wait for the file to complete the transfer to the XTC.
Step 9
Click OK when the "Lost connection to node, changing to Network View" dialog box appears. Wait for
Step 10
the node to reconnect.
If you cleared a switch in
Step 11
Stop. You have completed this procedure.
NTP-B163 Restore the Node to Factory Configuration
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Caution If you are restoring the database on multiple nodes, wait until the XTC cards have rebooted on each node
before proceeding to the next node.
Cisco strongly recommends that you keep different node databases in separate folders. This is because
Caution
the reinitialization tool will choose the first product-specific software package in the specified directory
if you only use the Search Path field. You might accidentally copy an incorrect database if multiple
databases are kept in the specified directory.
The following parameters are not backed up and restored when you delete the database and restore the
Note
factory settings: node name, IP address, mask and gateway, and IIOP port. If you change the node name
and then restore a backed up database with a different node name, the circuits will map to the new
renamed node. Cisco recommends keeping a record of the old and new node names.
Cisco ONS 15327 Procedure Guide, R4.0
14-10
Step 2, reapply the switch as needed.
This procedure clears the XTC database and restores customer or factory
defaults. This process involves uploading the most recent software
package and a blank database. This process is performed by the
RE-INIT.jar utility, also called the reinitialization tool.
Software CD containing Release 4.0 software, the node's NE defaults,
and the reinitialization tool. JRE 1.03_02 must also be installed on the
computer you will use to perform this procedure.
NTP-B108 Back Up the Database, page 14-6
As needed
Onsite
Superuser
Chapter 14 Maintain the Node
March 2003