Ntp-H104 Restore The Node To Factory Configuration - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 14 Maintain the Node
Perform any of the following tasks as needed:
Step 2
•
•
•
Stop. You have completed this procedure.

NTP-H104 Restore the Node to Factory Configuration

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Caution Cisco strongly recommends that you keep different node databases in separate folders. This is because
the reinit tool chooses the first product-specific database in the specified directory if you use the Search
Path field instead of the Package and Database fields. It is possible to accidentally copy an incorrect
database if multiple databases are kept in the specified directory.
Caution Restoring a node to the factory configuration deletes all cross-connects on the node.
If you are restoring the database on multiple nodes, wait until the 15310E-CTX-K9 card has rebooted
Caution
on each node before proceeding to the next node.
78-19416-01
DLP-H215 View IS-IS Routing Information Base, page 18-13
DLP-H216 View ES-IS Routing Information Base, page 18-13
DLP-H217 Manage the TARP Data Cache, page 18-14
This procedure reinitializes the ONS 15310-MA SDH using the CTC
reinitialization tool. Reinitialization uploads a new software package to
the 15310E-CTX-K9 card, clears the node database, and restores the
factory default parameters.
Cisco ONS 15310-MA SDH System Software CD, Release 9.1 and
Release 9.2.
JRE 5.0 must be installed on the computer to log into the node at the
completion of the reinitialization. JRE 1.6 must be installed for Release
9.2. The reinitialization tool can run on JRE 1.3.1_02, JRE 1.4.2, JRE
5.0, or JRE 1.6 (Release 9.2 only).
NTP-H102 Back Up the Database, page 14-2
NTP-H13 Set Up Computer for CTC, page 2-1
One of the following:
As needed
Onsite or remote
Superuser
NTP-H14 Set Up TL1 session for Local Craft Connection to the
•
Node, page 2-3
NTP-H15 Set Up a CTC Computer for a Corporate LAN
•
Connection to the Node, page 2-4
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Before You Begin
14-5