SSANGYONG Rexton Y200 Manual page 1569

SSANGYONG Y200
3. Remove speaker of side.
1) Remove door trim.
2) After removing speaker assembly, remove
connector of speaker.
3) Install the reverse order of removal.
YAD9D830
Accessory of audio system
Audio
1. Separate the negative terminal of battery.
2. Remove center of instrument panel.
YAD9D840
3. Remove audio
•
Release fixing screw of audio.
•
Separate cable of antenna and connector.
•
Remove audio.
4. Install the reverse order of removal.
YAD9D850
Controller of audio remote
1. Remove air bag module of steering wheel or horn
pad on the driver seat.
2. After releasing connector and fixing screw, and
then remove remote control.
3. Install the reverse order of removal.
YAD9D860
BODY ELECTRICAL 9D-41