SSANGYONG Rexton Y200 Manual page 1566

9D-38 BODY ELECTRICAL
2. After releasing the housing fixing screw of lamp,
and then separate housing.
3. After separating connector of lamp housing,
remove lamp housing.
4. Install the reverse order of removal.
YAD9D750
Center / rear lamp
1. After removing lense of lamp, remove bulb.
YAD9D760
2. After releasing housing fixing screw of lamp,
separate the housing.
3. After removing connector from the lamp housing,
remove lamp housing.
4. Install the reverse order of removal.
YAD9D770
SSANGYONG Y200