SSANGYONG Rexton Y200 Manual page 1557

Illumination intensity
Illumination intensity of light on
Illumination intensity of light off
SSANGYONG Y200
YAD9D540
Operation Condition
Lamp
Condition of tail lamp
30.5 ±¾5 (LUX)
60.5 ±¾5 (LUX)
BODY ELECTRICAL 9D-29
Sensor Unit Terminal of Auto Light
1 Power Supply For System
2 Auto Light Switch
3 Non-Use
4 Relay of Head Lamp
5 Relay of Tail Lamp
6 System Grounding
Operation of Auto Light and Operating
Condition
Operation of switch function
1. After turning ignition on, operate multi-function
switch, OFF → TAIL LAMP → HEAD LAMP →
AUTO switch.
2. Turn tail lamp, head lamp "on and off"
3. Turn switch of AUTO ON, While sensor is sensing
illumination of light, which is set on the diode of
photo. As quantity of illumination of light is
equivalent to voltage which is set on the internal
CPU, tail lamp and head lamp is turned on and off
automatically.
4. Switch of tail lamp and head lamp is operated by
hand, tail lamp and head lamp are not turned, on
and off by sensor.
5. If switch of ignition is turned off, tail lamp and
head lamp is turned off.
Condition of head lamp
8.9 ± 3 (LUX)
17.2 ± 3 (LUX)
Time of delaying
0.5 ± 0.1
3 ± 1