Door Trim - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200

DOOR TRIM

Removal and Installation
1. Remove the negative (-) terminal of battery.
2. Separate power window switch assembly.
YAD9C750
3. After inserting special tool or driver, remove door
trim.
YAD9C760
4. After removing door trim , remove connector of
door lamp and, cable of internal door handle.
YAD9C770
5. Remove seal of door trim.
Notice: Pay attention about damage of seal.
YAD9C780
BODY EXTERIOR 9C-27