Contact Coil - SSANGYONG Rexton Y200 Manual

SSANGYONG Y200

CONTACT COIL

Removal and Installation Procedure
1. Remove the steering wheel, the lower panel at the
driver side.
YAD8B140
2. Remove the upper and lower cover of the steering
column.
YAD8B150
3. Disconnect the contact coil connector and remove
the contact coil mounting screw. Remove the
contact coil assembly.
YAD8B160
4. Tighten the contact coil mounting screw as the
specified torque.
Installation should follow the removal procedure
in the reverse order.
Installation Notice
Tightening Torque
YAD8B170
RESTRAINTS 8B-17
3 N•m (27 lb-in)