SSANGYONG Rexton Y200 Manual page 1445

9A-6 GENERAL BODY
5. Internal wind noise is repaired following description
•
Leaking section is detected by using
stethoscope or vacuum hose is repaired by
using vinyl tape temporarily.
•
Keep driving test to check whether wind noise
is removed or not if leaking section is checked.
•
Wind noise will be completely repaired by
proper equipment, tool of sealing.
YAD9A0650
Body
Periodically hood and locking system should be fed
for operating smoothly, specially feeding oil to the
section of closing and opening is depending on
operation smooth and prevention of noise.
YAD9A060
Bolt and Nut
Notice: Contacting surface to the non-characteristic
of each metal cause each metal to corrode so, for
prevention of early corrosion, use specified bolt and
nut
Alloy of aluminium is using currently most vehicle
Contacting between steel and aluminium cause to
corrode if those are ,not hardening.
Special bolt and nut are using for prevention of
corrosion in the vehicle.
If bolt and nut are replaced, same specification of bolt
and nut should be, used or similar material of bolt and
YAD9A070
nut.
The Prevention of Corrosion
In order not to corrode body, surface of internal panels
of metal is added, material of anti-corrosion. If those
panel are replaced, spread material of anti- corrosion
on the panels with proper quantity
YAD9A080
SSANGYONG Y200