Seat - SSANGYONG Rexton Y200 Manual

9B-16 BODY INTERIOR

SEAT

Removal / Installation
Front seat
1. Remove plastic cap (3ea) of seat rail.
2. Separate fixing bolt (4ea: M10) of seat rail right
and left.
YAD9B410
3. After separating connector of floor wiring, remove
front seat.
•
Position of connectors
1) Driver seat : 2 each , SAB : 3 each
2) Passenger seat : 1each, SAB : 2 each
YAD9B420
While the seat is installed, technician should
tight the torque, as following.
Tightening Torque
YAD9B430
Two row seat
1. After separating cover fixing screw (2 each) of seat
mounting in the seat right and left, remove cover
of seat rail.
YAD9B440
35 - 55 N•m
(44 - 52 lb-ft)
SSANGYONG Y200