SSANGYONG Rexton Y200 Manual page 1563

SSANGYONG Y200
•
After installing head lamp, proceed to arrange
of focus.
YAD9D630
Turn signal lamp / fog lamp
1. Remove the negative terminal of battery and head
lamp.
2. After releasing fixing bolt of lamp of front turn
signal lamp and fog lamp, remove connector.
3. Remove lamp assembly from the bumper.
4. Install the reverse order of removal.
•
Fix the left of lamp on the hook of bumper, and
then tighten the right with fixing nut (2 ea).
YAD9D640
Rear combi - lamp
1. Remove the negative terminal from battery.
2. Separate fixing screw (2ea) of rear combi - lamp.
YAD9D650
3. After separating bulb from rear combi-lamp and
then remove rear combi - lamp.
YAD9D660
BODY ELECTRICAL 9D-35