SSANGYONG Rexton Y200 Manual page 1499

9C-30 BODY EXTERIOR
Adjusting Striker of Door Lock
Notice: Striker of door lock consists of striker and plate
of floating cage in the pillar body, plate of floating
cage can easily adjust by controlling striker up and
down, left and right. As fork snap of door lock is linking
the striker, the door comes to position of closing.
YAD9C870
Adjusting Forward and Backward
1. Door keep on the one line between door lock fork
and striker.
2. Handle of door is pushing fork of door lock into
contact on striker.
3. After door is set on position of opening, to keep
contact fork of door lock with striker, open and
close the door slow repeatedly.
YAD9C880
4. Technician can see keeping fork of door lock
alignment with striker. Fork of door lock is linking
perpendicular to center of striker, is linking center
of body pillar.
YAD9C890
5. As striker is required for adjusting to forward and
backward, proceed following the descriptions.
1) Release fixing bolt of striker.
2) If striker move to backward of vehicle , spacer
is removed.
3) If striker move to forward of vehicle, put addition
spacer (2 mm).
4) Tighten fixing bolt of striker.
6. Proceed to repair adjusting up and down, forward
and backward.
YAD9C900
SSANGYONG Y200