SSANGYONG Rexton Y200 Manual page 1556

9D-28 BODY ELECTRICAL
Auto Light System
Summary
Controlling of auto light cause tail lamp or position
lamp to turn on or off, sensor unit of auto light is
attached on the upper panel of instrument, this unit is
sensing change of illumination to atmosphere, though
driver does not operate light switch, yet if mode is set
on AUTO, head lamp and tail lamp is automatically
turned on and off, during the vehicle is driven on the
time of day through tunnel area, foggy area, rainy day,
or snowy day, due to the low of illumination around
atmosphere, this system is operating.
Specification
Name of part Description
Voltage of load 9 -16 V
Load
MAX 200 mA
Sensor unit of auto light
Temp available
- 30 ~ +85 ° C
Room temp for keeping - 40 ~ +120 °C
Position of attaching
Upper right section of instrument panel
Input and Output of Diagram
YAD9D530
SSANGYONG Y200