9C-22 BODY EXTERIOR
SIDE MOULDING
Removal and Installation
1. After releasing fixing screw of wheel housing
moulding in the front and rear, remove moulding.
YAD9C560
2. Using special service tool, remove door moulding
of front and rear.
Notice: While door moulding and moulding of
wheel housing is removed, pay attention on the
damage of painting section, in order not to make
scratch of moulding.
YAD9C570
3. Install reverse order of removal .
Notice: While moulding is installed, install
moulding tightly, not to make the gap.
YAD9C580
OUTSIDE MIRROR
Removal and Installation
1. Remove trim cover of front door.
YAD9C590
SSANGYONG Y200