SSANGYONG Y200
REPAIR
Repair Leaking Water
Leaking water on the section of glass can be repaired
without removal of glass.
Notice: Method to repair of following description is
applied on the equipped glass of urethane sealing.
1. Remove leaking moulding and section of trim, to
detect position of leaking water it is necessary for
technician to remove trim and garnish moulding
2. During injecting water on the leaking section, to
detect quantity of leaking water, carefully push
YAD9A090
the glass external area.
3. Mark accurate position of leaking water.
4. Wash section of leaking water and dry up air hose.
5. Remove ununiform section of cohesive material
on the distance of 75 - 100 mm to leaking section
6. Spread prima on the uniform section leaking
YAD9A100
GENERAL BODY 9A-7