9C-32 BODY EXTERIOR
8. After separating fixing bolt (3 ea) of crank of tail
gate, remove crank.
Notice: If rekes is installed, key road is removed.
9. Install reverse order of removal.
YAD9C940
YAD9C950
TAIL GATE
Removal and Installation
1. After separating grommet of tail gate and wiring
connector (2 section), remove hose of nozzle
washer.
YAD9C960
2. Using service tool, after opening up clip (4 ea) at
end of both gas lifter, remove gas lifter (right/left).
YAD9C970
SSANGYONG Y200